# How Do Train Engineers Go To The Bathroom?

## Where do train drivers go to the bathroom?

Train engineers go to the built-in locomotive bathroom, located in the front hood area of the locomotive..

## How many miles does a locomotive last?

If you are talking locomotives, a few millions give or take rebuilds. If you are talking about specific train consists, sometimes a few miles sometimes a few thousand (in the USA, the Trans-Siberia Railroad might have consists that can last semi-close to 10,000 miles).

## What does a Roomette look like on a train?

A Viewliner roomette has a picture window with two wide, reclining seats that face each other. In the middle of the seats is a pull-up table that unfolds. There’s also an upper bunk with its own window and basket for reading glasses, etc. Right next to one of the seats is the “bathroom”.

## How many miles per gallon does a locomotive get?

The efficiency of this freight haul would be calculated as: (3000 tons x 500 miles) / (3,049 gallons) = 492 ton-miles per gallon. This efficiency might be stated as “a train can move a ton of freight 492 miles on a gallon of fuel.”

## Can train engineers listen to music?

But you are allowed to listen to your radio without headphones. Reason being, and you’re right, Scfe_fan, wearing headphones drowns out outside sounds. I wish train engineers were allowed to listen to music up in the cab. As long as they’re not wearing headphones and keeping it at a reasonable volume.

## How many hours can a train crew work?

12 hoursSince a train crew can work a FRA maximum of 12 hours, when does the clock start ticking on their 12 hours?

## Are there bathrooms on trains?

Passenger trains usually have toilets, and the on-board lavatory takes many forms. The simplest train toilets are those called Drop Chute Toilets or Hopper Toilets. … The toilet dumps directly onto the track just like a hopper car used to transport grain.

## How do you sleep on a train?

Choose comfortable, loose-fitting sleep clothes and warm socks. Bring a small travel blanket/pillow for your own personal comfort. If you’re sensitive to light while sleeping, bring a sleep mask and close the curtains over the window(s).

## How long is a train engineer shift?

What are your average work hours? Our schedules are on call, 24/7. I get a two hour [in advance] call to show up to work, then take a train to another city, take my required 12 hours of rest at a hotel, then wait for a train home. I generally will be home for 12-24 hours, then an average trip will be 36-46 hours.

## Why can’t you use the toilet on a train in a station?

Most trains don’t have sewage tanks so anything in the toilet is dumped straight onto the tracks. Human waste is deposited onto the tracks at Paddington station on a daily basis, causing it to pile up and create a disgusting mess.

## Do trains have showers?

An Amtrak sleeper car is a train car that contains restrooms, shower rooms and sleeping accommodations (not coach seats). Only the overnight and long-distance trains have sleeper cars, which contain roomettes and bedrooms.

## How much fuel does a locomotive burn at idle?

Using an average of 3.5 gallons of fuel burned per hour idling per locomotive – some easy math shows an annual consumption of over 20 million gallons of excess idle, which is over 4% of the total annual fuel consumption for that particular Class I railroad – do we have your attention yet?

## Do you need a degree to be a train engineer?

Rail companies typically require a high school diploma or equivalent, especially for locomotive engineers and conductors. Locomotive engineers generally receive 2 to 3 months of on-the-job training before they can operate a train on their own.

## What’s the difference between a conductor and an engineer?

Conductor is, by definition and rule, in charge of the entire train. Not only the passengers, but to keep the train on time, operate safely, etc. The Engineer is responsible for operating the locomotive consist. Both can talk to the dispatcher and copy mandatory directives, track authority, etc and relay to the other.

## Do train engineers sleep on the train?

The engineers and conductors get off the train, go to a hotel, rest until the next train comes and run it back to their origin point. … They do sleep on the train either in their own sleeping car, in the case of the sleeper attendants, or in the dorm car, in the case of the diner/snack crew.

## Why do train engineers sit on the right?

In a typical situation where the trains run on the track on the right, putting the Engineer on the right allows him to catch his orders from his side of the cab. Otherwise the block operator would have to be standing between the tracks!

## Do overnight trains have showers?

Passengers traveling on a train with a Superliner Sleeping Car also have access to a Family Bedroom. These rooms offer a family of four – two adults and two kids – plenty of space to stretch out during their journey. … Families in these rooms share toilet and shower facilities with the train car.

## How many miles per gallon does a train get?

470 milesThanks in part to these technologies, today U.S. freight railroads can, on average, move one ton of freight more than 470 miles per gallon of fuel, making rail an environmentally friendly way to move freight over land.

## What is the white stuff on train tracks?

Update: As the white substance identified as “sand” by Norfolk Southern railroad dissolved into the railroad tracks in Old Metairie Wednesday, the state Department of Environmental Quality said the material is in fact a calcium compound.

## Where does toilet waste go on a plane?

From the lavatory, the waste travels through the plane’s pipes to the rear of the plane and remains in a tank that can only be accessed from the exterior of the plane — pilots can’t clear the tanks during the flight. The tank is emptied by special service trucks once the plane is safely on the ground.

## How many cars can a locomotive engine pull?

Trains would consist of an average of 60 cars and hence, have a carrying capacity of 4,440 tons. A modern railcar has a gross capacity of 286,000 lbs or 125.5 tons moving in trains consisting of 100 cars or more, yielding a total carrying capacity of 12,500 tons, an increase of over 181% in carrying capacity.