- Can I just paint over old paint?
- How many coats of paint is too many?
- How many coats of undercoat do you need?
- What paint roller gives the smoothest finish?
- Do I need to use undercoat after primer?
- How long does an undercoat take to dry?
- Does primer need to be perfect?
- Is 3 coats of paint better than 2?
- What happens if I paint without primer?
- Do I need to undercoat over old Gloss?
- Is primer and undercoat the same?
- Do I need 2 coats of primer?
- Do you need to use undercoat when painting?
- Do skirting boards need two coats?
- Do you cut in before or after rolling?
- Should ceiling paint be flat or eggshell?
- Can I use white paint as a primer?
- Can I use white paint as undercoat?
Can I just paint over old paint?
How Do I Paint Over Painted Walls.
If the wall is in good condition and the paints are chemically the same (both latex, for instance), you have a few options when the new paint is the opposite shade of the old paint.
You can use a primer to thoroughly cover the old color, then apply 1 or 2 coats of the new paint..
How many coats of paint is too many?
Interior Surfaces With interior painting, we are still concerned with durability, but are more concerned with coverage. In general, we still say that two coats is a good rule of thumb. The thicker coverage, again, provides greater durability, and it also makes it easier for you to wash or scrub the surface if needed.
How many coats of undercoat do you need?
Two layers of undercoat should cover any darker paint finishes underneath and also helps to build a better base for the gloss coat. Leave the second undercoat to dry for 24 hours and then rub it down all over with 400-grade wet and dry paper (used dry) wrapped around a sanding block.
What paint roller gives the smoothest finish?
Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces – Microfiber rollers are best.
Do I need to use undercoat after primer?
“Yes, you need to prime first then undercoat and gloss. If the wood you or painting is shiny I would use a zinner primer first.
How long does an undercoat take to dry?
The standard undercoating dries to the touch in 30 minutes. It is fully dry in 24 hours. The professional grade undercoating dries to the touch in 10 minutes. Allow 72 hours for a full cure.
Does primer need to be perfect?
The primer coat doesn’t have to be perfect, but it should cover the surface (no bare spots) and it shouldn’t be so blotchy that you get drips or visible unevenness. You need to prime the surface thoroughly. The purpose of the primer is so give the surface uniform absorbtion properties.
Is 3 coats of paint better than 2?
Choose the Right Number of Coats for Your Painting Project. Before you think the answer is as simple as 1, 2, or 3, we should say that every project, color, and surface is a little different and has unique requirements. … Three Coats– In this last scenario, three coats would actually be the absolute minimum number needed …
What happens if I paint without primer?
Because it has a glue-like base, drywall primer helps the paint adhere properly. If you skip priming, you risk peeling paint, especially in humid conditions. Moreover, the lack of adhesion could make cleaning more difficult months after the paint has dried.
Do I need to undercoat over old Gloss?
If you want to paint over gloss with gloss there’s no need to use it. Just give the surface a clean and sand before painting. If you are painting over gloss woodwork with a satin or eggshell finish, you also won’t need to use this primer. Lightly sanding and cleaning will help the new paint adhere.
Is primer and undercoat the same?
Decorators often use the terms interchangeably but in simple terms an undercoat is always a primer, but a primer is not always an undercoat. … One easy way to remember is if a surface is painted use an undercoat, if it’s new use a primer.
Do I need 2 coats of primer?
A: Although paint might initially stick to an unprimed wall, you risk blotchy, cracking, peeling results if you pass on primer. … Generally, one to two coats of primer will suffice for painting interior walls, but how many you’ll need depends on the wall material, the paint color, and the type of primer used.
Do you need to use undercoat when painting?
It’s essential to use the correct primers and undercoats to allow paint to do its job properly. Undercoat is often required to seal unpainted surfaces or prepare the surface for painting. If you are transitioning from a dark to a light colour, the undercoat will help to obliterate the colour beneath.
Do skirting boards need two coats?
For a professional finish, you’ll require at least two coats. Allow the paint to dry completely then use a fine grade sandpaper to lightly go over the skirting before you start on the second coat. Look for any drips or bumps, being sure to sand them right down.
Do you cut in before or after rolling?
Cut in the corners before you roll paint on the main surfaces. This means painting both sides of each corner starting about two brush lengths away and painting in to the corner. Use a 2- or 3-inch brush for paints. You can cut-in around the trim either before or after rolling.
Should ceiling paint be flat or eggshell?
Although a flat finish is most popular, more ceiling paint finishes are available: Eggshell finish: After flat, eggshell finish is the next most popular ceiling paint finish. Eggshell paints offer a low sheen while still absorbing most light and hiding ceiling imperfections.
Can I use white paint as a primer?
You should not use white paint as primer, as primer has a higher concentration of solids plus it contains an adhesive binder and acts as a sealant. A good quality primer is designed to provide the final finish coat with a better bonding surface than the bare surface itself, unlike white paint.
Can I use white paint as undercoat?
White emulsion under cream will be fine. You don’t (normally) use “undercoat” on walls. The white matt will be fine but make sure the walls are clean and free from dust. White emulsion is the correct solution.